Best Water Purifiers in India 2020

Kent grand can regulate the TDS level of the water up to 500-2500ppm due to its patented RO technology. It is recommended to use a TDS meter if you want to know the accurate and correct level of TDS for the water you consume

It comes with the double-stage purification technology, including the RO and UV/UF. This is effective in filtering out most of the contaminants and and other impurities. However, this will lead to water discharge that amounts to 650 ml for every single litre of water that will be purified.

As far as the energy consumption is concerned, it just uses about 60 watts of power which is considered decent and economical for a water purifier.

Talking about the filtration, the Aquasure Smart plus performs multilayer water filtration. It proceeds with filtering out impurities in i-filter. Then chemiblock and the UV decontaminator trap any chemical particulate inside them.

The membrane life-enhancer along with the reverse osmosis, ensure to improve the water quality and taste.

The MTDS regulator, embedded in the device’s system regulates the TDS content ranging between 200ppm to 2000 ppm in the water. For getting the accuracy in your measurement, you need to find out the correct TDS levels of the water sample with a TDS meter.

Also, just like the so many other purifiers, you will notice that 650 ml of water gets wasted, per 1 litre of water purified. You can collect this water and utilize it for dishwashing or cleaning 650 ml purposes.

Aquaguard consumes considerably higher value of power (230 watts) in comparison to many other purifiers. However, the smart energy-saving mode ensures that power is spontaneously shut off when the appliance is not use.

The smart performance of Aquasure also works to ensure device safety during voltage fluctuations at home.

The cartridge life indicator is a smart feature to inform you about the water purification cartridge’s life expectancy, which is ideally 6000 hours. However, factors such as TDS levels and others might lower it.

The tank is built using food-grade plastic and the innovative germ block technology. The visible dirt and other particles get removed from the water as it enters the sediment filter.

Next, it undergoes the pre carbon filter for having a chlorine content check and control. Then, the sediment 5 filter lowers the turbidity of the water.

The copper guard technology will eliminate the foul smell present in water and also helps in improving its taste

The TDS regulator in the RO Membrane can filter and clear our TDS as high as 2500 ppm in water. It’s best to test the TDS levels in water before using this for positive results. Later, the post-carbon filter called the MAT will upgrade the taste of the water.

The UV and UF filter will keep the mineral content in check and perform a final bacterial purification before you drink the water.

You should know that during the above process, for every 1-litre of water purified, about 650 ml of water is discarded as waste.

Faber Galaxy is also believed to have good energy consumption, which is close to 36 watts of power. It also features an energy-saving mode for turning off the device’s power supply, when the tank is full.

If we consider its water purification technique, it boasts of 6-stage water purification. First, the water reaches the sedimentation filter where the filtration of visible dirt particles takes place.

Then the water arrives at the pre carbonated filter which is works to absorb all the chlorine and other related chemical impurities.

Reverse Osmosis chamber (RO) makes sure draw out pesticides, herbicides and some other complex synthetic compounds. The water is then thrust into the UV disinfection chamber, which ensures to remove any bacterial residue in it.

Later, the post-filter carbon filter restores the taste of the water. Finally, the mineralizer will check to ensure the water has balanced mineral levels.

The TDS regulator can check water with TDS as high as 1500 ppm, which is often a problem in a place with high TDS content in water. Always review your area’s water TDS level beforehand to check if it’s between 30 and 100ppm.

Note that for every 1 litre of water getting purified, the device will give out 650 ml of waste water. This water can be useful for other applications like gardening.

This water purifier offers excellent features such as purification processes indicator and full tank status indicator. The system automatically switches off when the tank gets full. Therefore, the 7-liter tank capacity allows you to get pure water even during no current supply.

Speaking of the TDS, the RO Purifier is capable of filtering and regulating the TDS levels maximum up to 1000ppm. This renders the purifier unfit for homes in areas with a lot of contaminations or the TDS level of water is enormously high.

Before choosing this device, you’ll be required to perform a TDS testing to know what the TDS level of your water source is.

RO and UV technologies, work to eliminate contaminants such as the bacteria, viruses, and other impurities from the water. On the other hand, the UF and TDS ensure to maintain the balance and optimum level of natural minerals in the water.

When we consider the energy consumption of Aqua Fresh, we notice that it consumes very low power of roughly 24 watts.

The system is completely automated with two separate alarms for notification about changing filters and non-functioning UV filters

The 6 stage purification process of Pureit utilizes the main filter which can vary depending on the product variant that you choose.

The different main filter versions include RO+MF (microfilter) version, RO+UV+MF, and RO+UV version too. The RO+UV+MF combination can filter the water thrice more efficiently than other solo filter water purifier.

This purifier is known to purify water till 2000ppm TDS. It is effective enough for most areas. To ensure accuracy in measurement, you should learn about your water’s TDS levels by using TDS meter or by contacting your authorities.

Similar to several faster purifier models given here, this device too throws out around 650 ml of water for every single litre of water being purified by it. It is good if you store and reuse this water for other needs.

Pureit features an excellent energy-saving mode which functions to shut off the device when the tank gets full. It also saves the device in the event of voltage fluctuations.

It features an intuitive 6 stage filtration. The first three stages involve the movement of water through a pre-sediment, carbon and sediment filters.

These processes ensure to that visible impurities from the water are eliminated. After that, the water passes through the stages of RO, UV, and post-carbon filtration for the additional bacterial cleansing.

For better purification, every carbon filter present in the purifier is infused with copper. The calcite media or Aqua Taste Booster (ATB), which is located inside the filters act as taste enhancers to improve the taste of the water.

Overall, the Blue Star Aristo can effectively treat water with up to 2000ppm TDS.

Just like several other purifiers in the list, this Blue Star Aristo also generates 650ml of waste water for every 1-litre purifier.

You can place the discharge pipe in such way that this water is gathered in the sink or a tub for later usage.

This device has 36W of power consumption which is considered economical.

They have a highly efficient technology for reducing TDS levels and producing potable water. The Aquatec water purifier system can work to produce clean water from any water with TDS of upto 2000 PPM. Also, Advance Plus purifier system is great for making potable water received from any source.

This cutting-edge water purifier uses 8-level of water filtration system. The Sediment, Carbon, Ultraviolet, Pre-filter Post-carbon, and Ultra filter are included in the primary stage.

After several stages of purification, finally, you get the filtered water, which is odorless, germs-free and has natural taste.

Its power consumption requirement is 42W.

The filtration process involves stages, including RO, UV, pre-filtration, carbon filters, sedimentation, pH filters, and post-carbon filters.

The water’s pH is controlled by the mineralz technology, which is also responsible for including natural minerals in trace amounts.

A revitalizer performs its role of magnetizing the water, while enhancing its mineral absorption.

TDS filtering capacity of the device is a massive 3500 ppm. For every single litre of water getting purified, you will lose almost 650 ml as waste. This can be reused for non-drinking purposes.

The purifier comes with inbuilt alert indicators, such as UV lamp alert which makes it a highly efficient device. The iProtect system’s function is to secure the purifier from any potential power failure issues.

This device is manufactured with components sourced from the premium brands in the industry. It boasts of a 7 stage filtration process which is identical to most of the purifiers in the list. In the beginning, the pre sediment filters filers out all the visible impurities.

This is followed by techniques, including post carbon filters, the reverse Osmosis TDS membrane, carbon filters, and also the UV lamp for bacterial removal.

Finally, the alkaline filter functions to maintain the water’s pH level balance and induce flavour in the water.

Konvio Neer can work to regulate TDS levels of up to 2000 ppm in water along with an 80 GPD high flow. Higher GPD is considered favourable. The GPD booster can increase it to 100GPD, which will result in a full tank of water within an hour.

You are advised to first determine the TDS level of your water sample to get reliable results. Konvio Neer also offers a TDS meter and a free pre-filter.

It takes up approximately 3W of power, which renders it a highly energy efficient device. You also get a smart phone app which is designed to help you monitor your purifiers’ health, and create automatic service tickets when needed.